200n 400n 800n Thrust Model Aircraft Turbojet Engine Drone Jet Flight Engine Airplane Engine

• Customization: Available
• After-sales Service: 50hours
• Warranty: One Year
• Model NO.: Ulas
• Ignition Mode: Electric Ignition
• Speed: High Speed
• Cooling Cylinder: Air-Cooled
• Intake Pressure Impulse: Supercharged
• Piston Movement: Rotary
• Fuel: Diesel
• Number of Strokes: Two-Stroke
• Cylinder Arrangement Form: L
• Number of Cylinders: Single-Cylinder
• Type: Combustion Engine
• Max Thrust: 4000n
• Length: 625 mm
• Output: 750 W
• Weight: 22kg
• Transport Package: Wooden Case
• Specification: 272 mm
• Trademark: ULAS
• Origin: China
• Production Capacity: 1000

Product Description

A turbojet engine is a gas turbine engine that works by compressing air with an inlet and a compressor (axial, centrifugal, or both), mixing fuel with the compressed air, burning the mixture in the combustor, and then passing the hot, high pressure air through a turbine and a nozzle.
Move into the jet age with one of these affordable and reliable jet turbine engines from ULAS.
Each ULAS turbine comes with a brushless starter motor for efficiency and power, a fuel pump system and the latest V3 ECU. The V3 ECU has been designed from the ground up and is based on a 32 bit microprocessor and is specifically for use with ULAS turbines. The ECU supplies full auto start on kerosene with auto restart and includes a BUS input, a data terminal with data logging and a color screen that is visible in sunlight, telemetry function and configurable thrust curve. You also receive with each turbine an easy to install mounting kit, wiring harnesses, plumbing components and a operating and set up manual.
The WX110 is the normal turbine in the range but it is not short of power, it develops up to 1100 Newton of thrust. has a built in FOD screen, a very fast throttle response and offers one of the best cost over performance ratios in it's class. Maintenance intervals are a credible 50hrs and it will run happily on kerosene or diesel.

40kg/400N engine

No.	Item	Value
	Idle speed (r/min)	35000
	Max speed (r/min)	98000
	Max thrust (N)	400
	Max speed Fuel consumption (kg/N·h)	0.178
	Max gas temperature(ºC)	830
	Power system	DC28V
	Weight(g)	Net:≤3700 Gross:≤4500
	Diameter (mm)	≤148
	Maintenance time(h)	Every running 25hours/unit
	Fuel	(High quality diesel or RP-3 aviation kerosene) Add 5% lubricant oil

85kg/850N engine

Speed rpm	62500
Thrust daN	85
Gas temperature ºC	865
Fuel flow kg/h	124
Specific fuel consumption kg/daN/h	1.46
Specific thrust daN/m^2	2652.32
Thrust-weight ratio	8.46

Diameter mm	202
Intake diameter mm	121.4
Length mm	478.5
Net weight kg	10.25
Maximum working height m	10000
Maximum working Mach Ma	0.8
Minimum working temperature ºC	-40
Maximum working temperature ºC	60
Minimum starting temperature ºC	-40
Maximum starting height m	5000
Ground start-up time s	≯50
Acceleration time s	≯18
Deceleration time s	≯25
TBO maintenance interval duration h	25

110kg/1100N engine

MAX THRUST
		1100 N
Max. SPECIFIC FUEL CONSUMPTION (SFC)
		0.111 Kg/N/h
Operating Speed of The Engine (RPM)		Idling	Max
		30000	57000-60000
ELECTRICAL POWER OUTPUT
		750 W
MAX. DIAMETER
		272 mm
LENGTH
		625 mm
DRY WEIGHT (WITH ACCESSORIES)
		22 Kg
FUEL
		JET-A1, JP5, JP8
OIL
	3 cST Or 5 cST

150kg/1500N engine

Speed rpm	34000-55000
Thrust daN	150
Gas temperature ºC	<830
Diameter Max  mm	272
Length Max  mm	786.5
Net weight kg	21.5
Maximum working height m	14000
Maximum working Mach Ma	0.9
Minimum working temperature ºC	-30
Maximum working temperature ºC	60
Minimum starting temperature ºC	-40
Ground start-up time s	≤50

125KG 1250N

110KG 1100N

85KG 850N


40KG 400N

Equipment

                               Vacuum Furnace                                                                     Industrial Robot                                                            Five-axis CNC

                                     Air Drying Line                                                                    Wax Machine                                                                         CNC

Test Machine

 

ULAS is capable of meeting material specifications according to ASTM, SAE, AISI, ACI, DIN, EN, ISO and GB standards. We focus on more than 100 different ferrous and non-ferrous alloys. Dimensionally and geometrically complex investment castings are produced under the drawing, minimizing the need for secondary machining.

 

Investment casting of complex precision parts requires high-quality equipment capable of achieving tight tolerances with repeatable accuracy. Machinery and manufacturing processes must also be able to process large volumes quickly and seamlessly without compromising product quality.

 

At ULAS, we employ the latest in advanced technology and cutting-edge process equipment at various phases of the investment casting process. Tooling design, wax pattern injection, wax pattern assembly, shell-making, pouring, heat treatment, and testing are all performed using the best available machinery,operated by our qualified team of experts.

We have also developed 40kg, 85kg, 100kg, 125kg, 150kg etc. turbojet engine, widely used in aerospace.
 

FAQ

Q: Are you a manufacturer or trading company?
A: We are a manufacturer which was established in 2017 and has many years of production experience.

Q: Why should I choose you?
A: As a professional manufacturer, we can provide you best customer experience in Price and quality, of service. We have a very quick response system, so your question will be answered in one hour.