Thrust 400n 40kg Gas Aircraft Turbojet, Model Drone Jet Flight, Airplane Turbine Engine

• Customization: Available
• Warranty: 50hours
• Ignition Mode: Electric Ignition
• Model NO.: Ulas
• Speed: High Speed
• Cooling Cylinder: Air-Cooled
• Intake Pressure Impulse: Supercharged
• Piston Movement: Rotary
• Fuel: Diesel
• Idle Speed (R/Min): 35000
• Max Thrust (N): 400
• Transport Package: Wooden Case
• Trademark: ULAS
• Origin: China
• Production Capacity: 1000

Product Description

A turbojet engine is a gas turbine engine that works by compressing air with an inlet and a compressor (axial, centrifugal, or both), mixing fuel with the compressed air, burning the mixture in the combustor, and then passing the hot, high pressure air through a turbine and a nozzle.
Move into the jet age with one of these affordable and reliable jet turbine engines from ULAS.
Each ULAS turbine comes with a brushless starter motor for efficiency and power, a fuel pump system and the latest V3 ECU. The V3 ECU has been designed from the ground up and is based on a 32 bit microprocessor and is specifically for use with ULAS turbines. The ECU supplies full auto start on kerosene with auto restart and includes a BUS input, a data terminal with data logging and a color screen that is visible in sunlight, telemetry function and configurable thrust curve. You also receive with each turbine an easy to install mounting kit, wiring harnesses, plumbing components and a operating and set up manual.
The WX40 is the smallest turbine in the range but it is not short of power, it develops up to 400 Newtons of thrust. has a built in FOD screen, a very fast throttle response and offers one of the best cost over performance ratios in it's class. Maintenance intervals are a credible 50hrs and it will run happily on kerosene or diesel.

No.	Item	Value
	Idle speed (r/min)	35000
	Max speed (r/min)	98000
	Max thrust (N)	400
	Max speed Fuel consumption (kg/N·h)	0.178
	Max gas temperature(ºC)	830
	Power system	DC28V
	Weight(g)	Net:≤3700 Gross:≤4500
	Diameter (mm)	≤148
	Maintenance time(h)	Every running 25hours/unit
	Fuel	(High quality diesel or RP-3 aviation kerosene) Add 5% lubricant oil

WX40 Packing list

Name	Quantity	Size
Turbojet engine	1set	φ148mm×365mm
Fixing ring	1	211mm×57mm×82mm
ECU	1	258mm×76mm×35mm(With122mm External oil circuit)
GSU	1	65mm×60mm×10.9mm(With 500mm  Signal wire)
Desiccant	1
Instruction	1
Conformity certificate	1
Power line	1 pcs	650mm
Control line	1 pcs	530mm
Oil pipe 6*4	1500mm*2	Outside  diameterφ6mm×Inside  diameterφ4mm

Component Introduction
Turbojet engine mainly have four components:
1.  Engine body
2. ECU have two parts:
a. ECU(Electronic control unit)
b. The fuel pump also assembly into the ECU and controls the fuel input to the fuel pump and output to the engine combustion chamber through fuel pipe joints (long input and short output).
3. GSU(ground support unit) - is an auxiliary support device for turbojet engine, mainly used to set engine configuration and observe engine status.
4. Function line
a. Power line: Engine power inlet, one side aviation plug connected to ECU, another connected to power supply.
b. Control line: Communication, data exchange and command control.

Features:

• Compact, lightweight and powerful
• ECU
• Remote data terminal
• Data terminal screen is visible in sunlight
• Auto re-start
• Built in FOD screen
• Will run on kerosene or diesel
• Anodized can in silver

Specifications:

• Type: WX40 Jet Turbine Engine
• Thrust: 400N
• RPM Range: 30,000~80,000
• EGT: 700°C
• Fuel: Kerosene or diesel
• Lubrication: 5% with kerosene, 3% with diesel
• Start: Full auto start
• Restart: Auto restart
• Can Color: Silver
• Maintenance Intervals: 50hrs

Package Includes:

• 1 x WX40 jet turbine
• 1 x Motor mount
• 1 x Data terminal with harness
• 1 x ECU
• 1 x Pump with wiring harness
• 1 x Motor cable
• 1 x Throttle cable
• 1 x Battery power cable
• 1 x Plumbing components

125KG 1250N

110KG 1100N

85KG 850N


40KG 400N

 

Equipment

                               Vacuum Furnace                                                                     Industrial Robot                                                            Five-axis CNC

                                     Air Drying Line                                                                    Wax Machine                                                                         CNC

Test Machine

 

Parts

                               Turbine                                                                                                    Turbine Wheel                                                           Nozzle Ring
                                 Turbine Blade                                                                            Compressor Impeller                                                                     Diffuser

ULAS is capable of meeting material specifications according to ASTM, SAE, AISI, ACI, DIN, EN, ISO and GB standards. We focus on more than 100 different ferrous and non-ferrous alloys. Dimensionally and geometrically complex investment castings are produced under the drawing, minimizing the need for secondary machining.

 

Investment casting of complex precision parts requires high-quality equipment capable of achieving tight tolerances with repeatable accuracy. Machinery and manufacturing processes must also be able to process large volumes quickly and seamlessly without compromising product quality.

 

At ULAS, we employ the latest in advanced technology and cutting-edge process equipment at various phases of the investment casting process. Tooling design, wax pattern injection, wax pattern assembly, shell-making, pouring, heat treatment, and testing are all performed using the best available machinery,operated by our qualified team of experts.

We have also developed 40kg, 85kg, 100kg, 125kg, 150kg etc. turbojet engine, widely used in aerospace.
 

FAQ

Q: Are you a manufacturer or trading company?
A: We are a manufacturer which was established in 2017 and has many years of production experience.

Q: Why should I choose you?
A: As a professional manufacturer, we can provide you best customer experience in Price and quality, of service. We have a very quick response system, so your question will be answered in one hour.